Click on the images below to view actual
testimonial letters.
 It
took a lot of convincing for me to even try the spill
pro due to the cost, but after using the spill pro I
would not use anything else. It has saved us in more
ways than one. The fact that we can evacuate a system
instead of draining it and having to drain the drain
pan has saved us on man-hours alone, not to mention
that we have in floor drains that drain to a water separator
then to the soil and it has to be tested quarterly .
If we fail a test it would cost us another $500.00 for
a re-test, not to mention the expense of chemical to
get our discharge to an acceptable level. The savings
of possible Worker’s Comp claims due to falls
or slips on oil spills, oil dry, man-hours, and DEQ/EPA
tests has paid for this product in one month. I am now
a believer and plan to put this product in all of our
shops.
This product is a Safety Manager’s dream. Thanks
Spill Pro.
Kent Harrison
Safety/Risk Manager & Trainer
Louisiana Lift & Equipment, Inc.
Click
to view original (gif) |
Shawn Webb
The Spillpro
8080 Desert Cloud Ave.
Las Vegas, NV 89131
Shawn,
I just wanted to send you a note on the Spillpro. It
must be true that the proof is in the pudding. I was
on a tour of our facilities in the Rockies and kept
seeing these big aluminum cans on wheels - a different
size in each shop. When I would ask a tech about them,
they each had their own name for it: super sucker, silver
thing, that oil picker upper. They also all had the
same comment: I love it! When I tried to "reassign"
one to a different department, the supervisor (whose
nickname was "puddin") suggested that I go
to the lower regions in the earth. When I get thay kind
of consensus from unrelated sources, I know we have
found a keeper. I'm sure we'll be ordering some more!
Larry Hale
Stewart & Stevenson LLC
Environment - Health & Safety
Click
to view original (gif) |
The Spillpro
8080 Desert Cloud Ave.
Las Vegas, NV 89131
Re: 15 gal. Unit
Mr. Shaun Webb,
Doing business with Spillpro has been both cost effective
and a pleasure. When oil hits the ground we run for
one of our 7 Spillpro units. The 15 gallon units are
versatile and plenty adequate for our needs,
Furthermore it is our pleasure to do repeat business
with a company that stands behind their product. When
we needed replacement parts, not only did we get our
parts in a timely manner, you covered them under warranty.
We like buying U.S.A. made products. It's good to see
our flag on your product. God Bless America. We look
foward to doing business with Spillpro as our facility
grows.
Kevin Pargett
Tool Room
Click
to view original (gif) |
3/22/07
Spillpro,
We are very pleased with the performance and simplicity
of the SpillPro at our very large (usually #2 in the
chain) Cottman shop in Turtle Creek, PA.
Thanks,
Gary J Goeiz, President
GDM Enterprises, Inc.
DBA, Cottman Transmission of Turtle Creek
412-829-5900
Click
to view original (gif) |
Hello SpillPro,
Just writing to let you know what we think of the Spill
Pro. We were a little hesitant about trying the vacuum,
but after getting it here we found many uses. Not only
does it suck up oil & antifreeze off the floor as
you said it would, it also works great for sucking antifreeze
off our engines when doing intake gasket jobs. No more
mess of antifreeze dripping on the floor. Also when
snow covered cars come in the shop, we can easily suck
up the snow.
Thanks for the great product,
Gary
Auto-Tek
215 N. Sheridan
Minneapolis, KS 67467
Click to view
original (gif)
|
Good
Morning Kevin,
The unit has performed well for us
so far. In addition to floor cleanups, they have used
it for pulling transmission and hydraulic oils, as well
as fluids directly from drain pans.
The unit works great when using the larger attachments,
but the guys say that it is a little slow when
pulling through the smaller tube.
We knew that going in though, and I'm not sure
there is a resolution to the problem. We are pleased
with it none the less.
Guy R.
Sundvik
Assistant Field Division Manager
City of Pasco, WA
Phone: (509) 545-3463
Fax: (509) 545-3466
E-mail: SundvikG@ci.pasco.wa.us |
 January
10, 2007
Dear Brad,
I was happy to
have one of your Spill-Pro units demonstrated
at our shop in Ridgefield Washington. I was impressed
with how easy it is to use and I am looking foward
to not having to continually purchase other products
for cleaning up spills; and having to dispose
on those products.
This is a quick and easy way for our technicians
to clean up after themselves when a spill occurs.
Since the purchase was made in Ridgefiels we have
added more units in other branches as well.
Sincerely,
Steve Hidy
Branch Manager
Pacific Power Products
Hawaii
Click
to view original (gif) |
To
whom it may concern,
We have been
using Spillpro for over a year now and have found
it to be an extremely efficient and cost effective
alternative for cleaning & spills.
We also use Spillpro to transfer fluids from drain
pans to 55 gallon drums as well as pumping out
fuel tanks. This tool is used on a daily basis
and has freed up more of our technician's time
so they can get pur customer's vehicles out faster.
We take pride in the cleanliness of our shop and
thank Spillpro for assistng us with this.
Sincerely,
Brian Eki
Service Manager
Pacific Power Products
Click
to view original (gif) |
 10/2/06
Dear Shawn,
Occasionally,
a product or a piece of equipment comes to my
attention to fill a special need this company
has. Such a piece of equipment is the air-activated
vacuum canister manufactured by your company.
We purchased
the Spill-Pro about a month ago, and since that
time have used it to clean up spills and leaks
of hydraulic fluids, transmission and gear oil.
It has proven to be both efficient and had saved
our company about 50% in expense for absorbent
products.
With Spill-Pro
it now takes less than 5 minutes to transfer fluids
from a 55 gallon drum to the hydraulic tanks on
the different units. Additionally, when our new
equipment is getting primed with new fluid, we
use the Spill-Pro to pressurize the hydraulic
fluid to the pump, which prevents any possible
seizure.
We use our Spill-Pro
in our yard, and because of its portability can
also load it on a service truck and transport
it to a job site to clean up a spill caused by
a leaking cylinder or hose. I am also impressed
by the fact that this machine is far safer to
use around flammable fluids, due to the fact that
it is air operated, and is it affordable to purchase.
On behalf of
RJB Equipment and its management and employees,
thank you for bringing the Spill-Pro to out attention.
Yours very truly,
Tadd E. Burns
Service Manager
Click
to view original (gif) |
 10/7/06
To Whom It May
Concern,
When it first
arrived at our shop I figured what a waste of
money and that it would never be used.
About 3 days later I found out different! Someone
accidentally knocked over 5 gallons of used oil,
and instead of dumping several bags of oil dry
on the spill and making an even bigger mess, it
took a matter of seconds with spill pro.
Ever since that day, the oil dry is the only thing
sitting in the corner collecting dust!
Thanks Spill
Pro!
Carl Bradley
Mechanic
Sunbelt Rentals |
 10/9/06
To Whom It May
Concern,
My name is Mario
Villalba from United Rentals in Fullerton. A very
nice sales person by the name of Jessica called
me one afternoon and said she had a piece of equipment
that would make my oil spills disappear well we
talked and she convinced me that I could rely
on this in my day to day business she was not
lying.
This piece of equipment is great, my shop has
never been cleaner and I credit it to the machine
but more to Jessica for introducing me to a great
product.
From,
Mario Villalba
|
10-04-06
At first it looked
as if the Spillpro might spend a lot of time in
the corner of our shop waiting for a spill big
enough to clean up, until we used the attachment
on an oil change for a lift.
The Spillpro was quick and drained the old oil
complete. The Spillpro is one shop tool that will
be used everyday.
The Spillpro is very portable and will be used
in the shop as well as in the field.
Jeff
Acome
Shop Foreman
Sunbelt Rentals
Winchester, VA |
To
Whom It May Concern, We have tried
the Spillpro vacuum unit and have found it to
be every thing they said it was and more. It has
cut our cost on oil dry to almost zero.
It is very easy to use and it works great. With
a home made attachment it will also drain oil
from your engine's in turn making an oil change
on your equipment twice as fast which saves time
and money.
I would recommend this product to any one that
works in a shop where oil spilld are a problem.
This is one of the best additions to my shop that
I have made in a long time.
Thank you for introducing me to this great new
way of cleaning spills.
Thank you,
Don Francis
Service Manager
United Rentals Inc.
Branch 005
Rock Hill, S.C.
Click
to view original (gif) |
October 4, 2006
To Whom It May Concern,
The inventor of “Spillpro” has the right
idea of efficiency. Our shop is extremely pleased
with the performance of this recovery evacuation unit.
I highly recommend Spillpro for all clean up and recovery
liquids.
This unit is easy to use and handle. With all the
evacuation systems I have used, this is truly the
best. Spillpro is a must have system for every shop.
Now clean up time has reduced drastically, and everyone
enjoys using your system. Thank you for the opportunity
to use this wonderful product.
Sincerely,
Dennis Alleyne
Shop Foreman
Click
to view original (gif)
|
 July
14, 2006
Spillpro is
a great product!!!
Our center
purchased the first Spillpro Unit 2 years ago.
We were so thrilled with the unit, we purchased
a second one less than a year later.
All of the
employees in our shop use it, and have never
had any problems with them.
Aamco Transmissions
would highly recommend this product to other
shops. We have found that it pays for itself
in saving time of the employee and the cost
of cleaning materials.
Scott
H. Harvery/Owner
Aamco Transmissions
Las Vegas, Nevada
Click
to view original (gif) |
Spill
Pro has revolutionized the way we clean our shop.
This does exactly what it was designed to do. No more
waiting for the cat litter to do its thing.
With this baby, the spill is cleaned up faster then
an armadillo can cross the road. When we clean up
a spill, it's as if there never was a mess at all!
It's awesome! Way to go guys!
David
Tillotson
PCM 318 Sunbelt Rentals Inc.
Arlington, TX
Click to view original
(gif)
|
To:
ksantillie@thespillpro.com
Subject: FW: RE: Testimonial for meeting
Date: Fri, 24 Mar 2006 14:38:08 -0500
We find the "Spillpro" to be a very
handy and valuable tool in our shop. Hydraulic
messes are very often, unavoidable. It very quickly
vacuums up the majority of spilled oils.
We still use floor dry absorbents, but the amount
we use has probably been reduced by 70%. Although
its promamry "job" is sucking up oil
off the floor, we've also found it handy, with
the help of homemade adapters, in avoiding spills
by using it as a vacuum source.
When you have to remove a HYD. device that you
know will cause a steady leak for the duration
of the repair, create a vacuum in the thop of
the hydraulic tank first, then it doesn't leak
at all. We also have many pieces of equipment
with very slow draining hoses out of the engine
oil pans.
By using suction, an oil drain that normally runs
15 minutes can be done in less than 1 minute.
As a last note, it has reduced the time absorbents
have to be oh the floor drastically.
Jim Isakson-Service Manager
UNITED RENTALS
BRANCH 281,LEWISTON,ID |
June 30, 2006
The Spillpro
1075 East Highway 40
Vernal, UTah 84708
Attn: Marcus Charles
Ref. 25 Gallon Spillpro unit
Dear Mr. Charles;
I wanted to take a minute to thank you for contacting
me about your Spillpro units. It does everything
you said it would do and performs exactly like
the demo tape on your web site www.thespillpro.com.
After reviewing the demo tape, I was still a
little hesitant that the unit would perform
as shown in the video but after recfeiving the
unit and using it in our shop it does everything
you said it would do and as shown in the vide.
After we move into our new shop we will be purchasing
more units.
Thank you,
Tom Kennedy
Service Manager
Click
to view original (gif)
|
To: The Spillpro Team
RE: Free trial of your spillpro 13 gallon unit
Greetings,
Our staff found the Spillpro
unit easy to use and had excellent results for
cleanup. We found that is was faster and more
cost-effective to use this machine versus using
a plain mop or even worse using absorbent floor
sweep.
Adam
Hegewald
General Manager
Hydraulics, Inc.
Click
to view original (gif)
|
8531 Pulaski Highway
Baltimore, MD 21237
June 9, 2006
Kevin Santillie
Dear Kevin Santillie,
Subject: Spill Pro I just wanted to thank you
for the opportunity to try The Spill Pro.
In our industry (Heavy Industrial Equipment Repair
and Sales) we generate a lot of spills and have
historically used absorbent mats, etc. to remedy.
All you really accomplish with that method is
moving the mess.
It is very rare anymore that you find a tool that
works well, is reliable and does what you want
it to do. The Spill Pro has accomplished
all of those things and is remarkably easy to
use.
Thanks again for putting a great tool in our hands.
Regards,
Cole Craven
Director of Safety
Alban Tractor Co. Inc.
Click to view original (gif) |
April 17, 2006 The Spillpro
1075 E. Highway 40
Vernal, UT 84078
To Whom It May Concern,
We all know how hard it can be to keep a tractor
service shop clean, not to mention the rising
costs incurred along the way, specifically with
using oil absorbent pads to pick up oil spills.
The Spillpro offers everything we were looking
for and then some.
During our demonstration period we found the Spillpro
helped reduce and in some cases eliminate all
together the use of oil absorbent pads when cleaning
up oil spills.
We also discovered the Spillpro could be used
in some of our preventive maintenance procedures
to shorten up the pm process and even eliminated
the need for drain pans. We demonstrated eleven
13 gal. Spillpro units and were so pleased we
decided to purchase fifteen 25 gal. units.
The Spillpro has turned out to be the cost effective
tool we were looking for. Technicians like using
it because it’s on wheels, light weight,
easy to use and cuts down on clean up time.v As
a 5 Star Contamination Control dealership we know
the importance of a clean shop. The Spillpro helps
us maintain our high standards in the most cost
efficient way possible.
Sincerely,
Larry Oneill
Construction Product
General Manager
Patten Ind.
Click to view original (gif) |
Maple Valley Trans Srv Inc
23821 SE 264TH ST
Maple Valley, Wa 98038
To Whom this may concern:
The Spillpro Machine is a very good product for
sucking oil out of buckets for the transfer to
the barrel with no mess. Very good also for drawing
water out of the cleaning machine. Spillpro is
a good product for all types of mess clean up!!
Click to view original
(gif) |
|
From: Tom.Rakowski@tinker.af.mil
To: ksantillie@thespillpro.com,
Subject: FW: RE: Phone call
Date: Fri, 24 Feb 2006 10:48:51 -0600
Performing Depot Level maintenance out here at
Tinker Air Force base, Oklahoma City, Oklahoma,
the Spill Pro has been a valuable tool , in our
daily usage, to perform our tasks. One of the
tasks it assists us in performing, is when we
open up and mop out all the fuel tanks/bladders.
Once the aircraft lands here for depot maintenance,
we defuel the aircraft of what the Aircraft landed
here with.
Usually after this operation is performed, there
is usually around 100 to 300 gallons of fuel ,
still inside the tanks. In order for the LEL/O2
level to be within proper tech datalimits, for
this aircraft to go inside any of our hangars,
we have to send a person in the tanks and suck
out all the loose fuel and break the fine lines
to try and get all the fuel out of the Aircraft.
Prior to us receiving the Spill pro, we were using
a sucker barrel which is a 100 gallon tank on
a trailer.
It would be hooked up to 2 High Volume Low Air
units. Working the KC-135 from wing tip to wing
tip, would require 2 to 4 people to maneuver this
unit around. During the winter months, it would
be a hair raising deal to move this unit, the
air hoses and vacuum hose, over the ice and snow.
With the Spill pro, one person can perform this
task safely without worry. The unit is light weight
and ice and snow hold no problem to moving this
unit around, by one person.Another task we use
this unit for, is when we change components on
the flightline.
Changing fuel filters and hydraulic engine driven
generators, they are always fluid in the lines
we have to remove to change the component out.
With the Spill pro there, we can easily suck up
all the fluid that runs out on the ramp.
With this unit there, we cut down the cost of
buying absorbent material to absorb the fluid
, which in turn, cuts down on the hazard of F.O.D.
on the ramp. With the Oklahoma winds, this material
would never be where you wanted and needed it
to be.
Another task we use this for is when we Purge
the Aircraft engines for storage , before we remove
the engines off the aircraft. When we use the
purging fluid to cycle thru the engines, the Spill
pro is always there, to mop up any fluid that
comes out during the purge. The list goes on and
on and daily, we are finding new ways of using
this jewel, to our benefit.
The amazing thing, is with several dozen people
using this unit, it is a no brainer in operation.
It is simple and easy to use, and the unit has
hardly no moving parts to wear out or break down.
On the average , we have been using ours for around
18 hours a day sometimes 7 days a week, and it
works like it did on day 1. being a Work leader
out here at Tinker and having 30 plus years of
doing this job, we have finally found a unit that
works to our advantage and lives up to it's name.
I know years ago, people were reading in the paper
about the government buying $700.00 hammers and
$2,000.00 latrines, but they would be proud in
the government today, hearing how little we paid
for a unit that works like this unit does.
|
 From:
DanNeace@wseco.com
To: ksantillie@thespillpro.com,
Subject: FW: RE: Letter
Date: Wed, 28 Dec 2005 16:48:58 -0700
To whom it may concern,
We recently purchased the Spillpro units for
our shop to eliminate the need for floor dry
absorbent. Do to the high importance of contamination
in Caterpillar Dealer repair facility we found
the Spillpro saved us money and gave us no reason
to continue to use the absorbent.
It is now being used in some of our other facilities
and during our recent inspection from Caterpillar
it helped us receive the highest score possible.
Regards
Dan Neace
Service Supervisor
Western State Equip. Co.
|
| Subject:
FW: WONDERFUL
Date: Thu, 10 Nov 2005 12:40:48 -0600
Good Afternoon,
My name is Tom Rakowski out here at Tinker Air
Force Base, Oklahoma City, Oklahoma. Kevin Santillie
just performed a demo on your product and I just
wanted to tell you, that this gentleman was perfect.
Your product is something that we have been searching
for, and Kevin talked to us, on terms that we
can understand.
He wasn't dressed in a suit and tie and afraid
of getting a bit dirty. He is very knowledgeable
about the product he represents and answered all
the questions that everyone had for him. I can
only speak for the -135 Aircraft Division, but
I can say that he opened the door for your product
to be used and sold out here on the Air Force
Base.
As soon as our Safety office checks it out and
see's just what a great asset this machine will
be for us, I am sure that they will be talking
to the other weapon systems like B-1, E-3 , B
-52 and the Navy Squadron, to invest in this product.
Kevin is a valuable asset to
your company and we just wanted to extend a "THANK
YOU" to him and the company he represents.
I am sure that with the next few weeks, you will
be hearing from our purchasing personal, and they
will be putting in their order to purchase your
product.
Have a wonderful week end and keep up the fine
job. Thank You Kevin and
Spillpro.
Tom E. Rakowski
739-5846
5 out of 4 people cannot do fractions(Forrest
Gump)
76 AMXG / MXAATA |
TINKER AIRFORCE BASE |
www.weber.edu
WEBER STATE UNIVERSITY
|
www.cat.com
WAGNER EQUIPMENT
CO.
|
www.aamco.com
AAMCO
TRANSMISSIONS
HIGH DESERT PERFORMANCE
|
|
:: SIGN UP TO
OUR E-MAIL LIST!
We will not share or sell your information and it will only
be used for the purpose of telling you about what is going
on at The Spillpro.
<
|
|
